Typical of such events, the energy-saving

The article also details a list of all of the common measures to save energy.

Typical of the activities of the energy-saving

• The appointment of a person to be responsible for the delivery of events to the power-saving
• Training in the field of energy saving and energy efficiency improvement for the staff responsible for the delivery of events to the power-saving
• The Material to encourage staff to save energy
• The improvement is of the order of the work of the organisation and the optimisation of the lighting systems, heating, ventilation, water supply,
• With the introduction of the times of turning on and off of lighting systems, heating, ventilation, and heat from the shower screen and PRO.
• The rationing of the consumption of energy
• The assignment of the officials responsible for the control of turning on and off of the systems
• The organization of the work, the operation of the lamps, and to clean them up
• The implementation of the law with the students and staff on the issues of energy-saving
• The campaign's work, for reasons of energy-saving
• The development and introduction of a system to encourage the employees of the institution, for the shares of energy-saving
• To increase the technical know-how in the field of energy-saving categories of the employees of the institutions
• The establishment of a system for the management of the

Typical technical activities for energy saving

The power system

• The installation of the switches of the charge prior to the inputs of power transformers
• The resolution of faults in the switching equipment and power supply
• The replacement of oil in high-voltage vacuum circuit breakers
• The replacement of the transformers, the remaining modern
• The reduction of the power loss in the cable network
• The reduction of losses of electric power by improving power factor
• The increase in the download rate elektroPRyamnikov, and the transformer of the substation, to limit the idle speed
• The maintenance of the ratings of the voltage in the networks
• A uniform distribution of the loads on the phases
• The facilities of the power system, monitoring the power consumption of the electric
• The reduction in the number of persons in household electrical appliances kettles, coffee makers, electric kettles, and PR.)
• Optimizing the use of office equipment
• The application of frequency regulation of pumps of systems of water supply
• With the introduction of the energy savings to the burners of the cooking electric pressure
• The installation of thermostats in the heating system, electrical

The lighting system

• A reduction in the consumption of electricity at the target, from the lighting through to the reconstruction of the present system of lighting, by installing energy-efficient light sources.
• The reduction of the scope of application of the luminaires, with incandescent light bulbs and replacing light fixtures with fluorescent light bulbs
• The replacement of fluorescent lamps with the former modification, in the lamp of a new generation of lower power,
• The replacement of the traditional lighting, led
• Replacement of the electro-magnetic regulating devices of fluorescent lamps are the most cost-effective and reliable, and the key
• The paint on the walls in the lighter areas
• Decentralization-to enable lighting, through to the installation of a few switches, and the division of the illumination of the area the area must

The heating system

• The preparation of manuals for operation, management and maintenance of the heating system, periodic review of the control of the administration of the institution to comply with the
• This room has a heating system from the devices in the general ledger
• A hydraulic setting system built-in heating
• Annual chemical cleaning of the interior surfaces of the heating and water heating systems, and heat exchangers.
• Automation of systems of heating of buildings through the installation of the thermal properties of individual points (ITP) for controlling the flow of heat
• Removal of ornamental fences with the radiator
• The installation of floodlights for the irradiadores
• The installation of the stop valves thermostatic valves for radiators, of the heating
• The replacement of the tube, and the heating in the two wires
• To install the thermal curtain

Hot water system

• The preparation of manuals for operation, maintenance and management of systems for the supply of hot water, a regular monitoring and control on the part of the administration of the institution to comply with the
• The automation of the system, system WHOLESALE
• The Software of the re-circulation of the water in the system is SOG, and
• The reduction of electricity consumption through the optimization of costs, and for the regulation of the temperature of
• This room has the systems for the supply of hot water on the counters of hot water consumption
• The reduction of losses of heat in transportation through pipe, through the insulation
• With the introduction of the thermal insulation of the pipeline based on the ultra-thin heat-insulating coating
• Application of economy would suggest that the accessory
• The reduction of costs and water losses

The consumption of water

• The replacement of the wear and tear of the pipelines of the water supply
• The implementation of water recycling systems
• With the introduction of systems for the treatment of water and wastewater
• Application of economy would suggest that the accessory
• The reduction of costs and water losses

Waste heat recovery

• The introduction of waste heat recovery in the building
• To improve the energy efficiency of the drying facilities

The ventilation system

• The optimization of the operation of the ventilation systems
• The shut down of the ventilation during the lunch breaks, and out-of-hours-of-operation
• The application of a lock of the fan of the air curtain mechanism of the opening of the door
• The replacement of obsolete fans with a poor performance in a modern, more EFFICIENT
• The replacement of the remaining movements of the fan at a low EFFICIENCY in a modern, more EFFICIENT
• The implementation of the frequency regulation of the rotation speed of
• The application of the device for the control and management of the ventilation settings as a function of the temperature of the outdoor air (including use of VFD)

The system's built-in

• Turn on the air conditioner only when you need them
• With the exception of the heating and cooling of the indoor air quality
• To maintain control of the surfaces of the heat exchangers and the equipment of the

Stations

• The upgrading of the pumping aggregates
• The modernization of the electric drive of the pump
• The stabilization of the pressure in the hydraulic system

The compressed air system

• The implementation of a system for automated control of a process for the production of compressed air
• The decentralization of the power of the air,
• The introduction of the installation of the draining of the compressed air in the compressor station
• The modernization of the compressor of the refrigeration machine

Electrical equipment

• With the introduction of machines for welding of the tab мandкroPRasessorami control schemes
• To minimize the loss of energy to the welding equipment when the ridge of the arch
• The modernization of youPRstfiles has been aggregate transformer stage
• The implementation of the facilities of the high-temperature heating of a mixture of materials

The construction and wrapping up the design of the building

• The reduction of the heat losses of the heat through the window openings by installing a third-party glass or PVC film in between the frames in the space of a window
• The reduction of heat loss through the window openings by the installation of an economical reflective foil in the windows
• The additional power of pc to the cellular
• To improve the thermal insulation of curtain walls, floor slabs, walls, floors, and roofs, hoods, and t.p.
• The reduction of the heat loss of the heat by the end of the offset joints between the panels, in houses and
• Hydrophobization of walls (water-repelling coating on the walls)

Steam boilers and thermal power plant

• The preparation of textbooks and the mode of card operation, management and maintenance of the equipment and the periodical control of the management of the institution to implement it
• To maintain the high level of the coefficient of excess air and mixing it with the fuel
• The installation of the surface water in the economizer for the boiler
• The application for the ontonpandteльнымand sets, installations, a deep heat recovery system, facilities for the use of the latent heat from the vapor exit of the gases from the combustion pins on the heat exchanger)
• The increase in the temperature of the feed water at the entrance to the drum of a boiler
• The heating of the water in the feed water of the heat exchanger
• The contents of the purity of both the exterior and interior surfaces of the heating of the boiler,
• The cleaning of scale inside the boiler, the boiler, the heating method of the ultrasonic
• The use of the thermal powers of the boiler, through a sampling of the hot air from the top of the oil zone to meet and serve you in the suction line of the fan from blowing out
• Thermal insulation for both the exterior and interior surfaces of the boiler, and tepлonPRonвonдonв, and the seal of the valves and the treatment of the boiler (the temperature at the surface of the lining, must not exceed 55 degrees c).
• The installation of the systems of accounting of the cost of fuel, energy, water, and heat release
• You can automate the control of the operation of the boiler
• The application of a frequency drive for adjusting the speed of rotation of the pumps, fans, and swirls
• The translation of the boilers of the steam, in hot water
• The translation of a steam-heating system, water
• The rational for the download of concurrent systems
• The installation of the cogeneration installation (mini-CHP)
• The installation of a system to return the condensate
• The installation of the infrared sensor, continuous purge, and the heater of raw water
• The recovery of the lining of the boiler

Shipping

• The version of the car, the gas to the gas
• To maintain a uniform pressure of the air in the tires

Controlling the supply of power

• Automation, information and measuring systems (Aims), records of heat and electricity
• The modernization and expansion of the system to transfer information and technology
• The setting up of a centre for the collection and processing of data

The economics of power in a company is one of the most pressing issues that is facing the industry. This is related to the constant increase in the cost of electricity and other energy costs. The production of spending their finances on the raw materials and fuel, and the performance of the work, but it is more expensive to pay for the component of the energy.

Energy-saving in the event that you have spent on your business will allow you to significantly reduce your energy costs and, thus, have a positive impact on the condition of the technical-economic indicators of a company's work or production. Thus it may occur to increase the yield and improve the product competitiveness through the reduction of the cost of the product or service.